Device installation.
Step 1:
Initial set-up.
1) Insert the supplied till roll into your Payzone Plus at the correct orientation.
2) Place the Payzone Plus onto its charging dock and plug it in.
3) Turn the Payzone Plus on.
4) Ensure the battery level is over 70% charged to proceed further.
5) Wait for SAIO to appear on the screen.
6) When the Payzone logo appears, tap on the Network button.
Step 2:
Contacting the Payzone Helpdesk Team for codes.
1) You will now have to obtain your WiFi PIN and Registration Key codes. Simply call our friendly Helpdesk Team on 01606 566566.
2) They will ask you to provide your serial number. You can find it located on the bottom of your Payzone Plus at the till roll end.
Step 3:
Registering your Payzone Plus.
1) Enter your WiFi PIN on the Payzone Plus and select the network you want to connect to. (You may have to enter your own WiFi password to connect).
2) Wait for two minutes whilst the required information downloads, then reboot the device.
3) Once the terminal comes back on, select exit. Enter the registration key and the device will be ready to use.
Welcome to Payzone!